If the factory 4 digit passcodes (0000 for manager and 1111 for operator) are no longer accepted by the VacSmart Series machine, follow these steps to regain access and create a new manager and operator passcode.
- At the keypad screen press and hold number 5 until 8 small circles appear on the screen.
- Enter 6 4 9 3 2 5 8 4
- HOME screen will appear.
- Scroll right to SETTINGS and touch it.
- Locate USERS and touch it
- At top of the screen touch "PERSON+" to add operator and/or manager.
- Touch MANAGER (it will be highlighted) and touch GREEN arrow to confirm.
- Enter FIRST name and touch GREEN checkmark to confirm.
- Enter LAST name and touch GREEN checkmark to confirm.
- Enter 4 digit code and touch GREEN checkmark to confirm.
- Repeat step 6 to step 10 to add another manager or operators.
- NOTE: Operator can only run the machine while manager have full access to the programming.
- Touch back arrows o go back to HOME screen.
NOTE: If passcode is not required, the feature can be switched off in the USERS setting with the ON/OFF button right of "PERSON+".