Oil alarm code is displayed after 12000 cycles. At this time oil level and quality should be checked and/or replaced.
- Machine rear power switch is OFF.
- Press and hold UP and DOWN arrow buttons and switch ON machine.
- Hold buttons until CAL is displayed, then released buttons.
- Press DOWN arrow until OIL is displayed.
- Press and hold GREEN start button and then press the S selector button to reset the oil code.
- Press the RED stop button to exit to run mode.
Minipack does not assume any responsibility or liability for the advice given and shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this information.